Taxes included.
Ferment under pressure — with cooling and pressure control built in.
The BrewTaurus PF30L Conical Fermenter in our complete bundle: the same pressurised 304 stainless conical (to 1 bar / 15 PSI), now with a chilling coil, pressure/vacuum control and an insulation jacket so you can run controlled, pressurised fermentation right out of the box. The steep 60° cone drives trub and yeast down for crystal-clear beer.
Extra accessories included
- Chilling coil with built-in PRV (1 bar) + gas post + liquid post
- Adjustable pressure/vacuum valve, 1.5"
- 2 m high-quality silicone hose
- Insulation jacket
Why ferment under pressure
Fermenting under pressure (to 1 bar / 15 PSI) suppresses fusel and off-flavours, lets you ferment warmer and faster, and carbonates the beer as it ferments — less oxygen pickup, fewer transfers. The included chilling coil (run off a glycol chiller) and insulation jacket give you the temperature control to make the most of it.
Ports & layout
The domed lid carries a 4" TC top port, a 2" TC port, and two 1.5" TC ports (PRV, airlock, blow-off or hop-drop). The cone adds three 1.5" TC ports for a thermowell, carb stone, pressure gauge or sample valve. A 2" dump valve at the base makes harvesting and cleaning quick; three fixed legs take mountable wheels.
What's in the box
- PF30L Conical Fermenter (working pressure 1 bar / 15 PSI, max 2 bar)
- Chilling coil with built-in PRV + gas/liquid posts · insulation jacket · 2 m silicone hose · 1.5" pressure/vacuum valve
- Domed lid (4" + 2" + 2× 1.5" TC ports); band-clamp lid seal with gasket
- 1× 4" clamp + gasket + cap · 3× 2" clamp + gasket + 1× 2" cap · 5× 1.5" clamp + gasket + 2× 1.5" cap
- 2" butterfly valve + 2" elbow · 1.5" butterfly valve · 1.5" thermowell · 1.5" blow-off barb · 3× wheels
- Instruction manual
Pressure safety: working pressure 1 bar (15 PSI), never exceed the 2 bar (30 PSI) maximum. Always use a PRV.
Run the coil off a glycol chiller · Clean it with the CIP Kit · See all Pressurised Fermenters
Which PF30L version fits you
Three ways to run a 30 L BrewTaurus pressure fermenter — same class, different cooling and workflow. Your version is highlighted.
| Version |
Cooling |
Best for |
| PF30L Conical (non-jacketed) +[Extra] |
Drop-in chilling coil (included) |
Pressure + cooling, ready out of the box |
| PF30L Jacketed Conical |
Integral glycol jacket |
Hands-off, even temperature control |
| PF30L Unitank |
Jacketed + 8" lid + 2" dump |
Yeast harvesting & full unitank workflow |
Specifications
| Model |
BrewTaurus PF30L Conical Fermenter (+ accessories) |
| Material |
SS304, brush finish (glossy lid) |
| Capacity |
30–32 L (full) · 25–27 L batch |
| Pressure |
Working 1 bar (15 PSI) · Max 2 bar (30 PSI) |
| Cone |
60° |
| Wall thickness |
Body 1.0 mm · Lid 1.2 mm |
| Height |
75.7 cm (83.2 cm with blow-off barb + wheels) |
| Width / weight |
46.1 cm · 15 kg (excl. accessories) |
| Included accessories |
Chilling coil (PRV + posts), insulation jacket, hose, pressure/vacuum valve |