Skip to product information
1 of 9

PF55L Jacketed Conical Fermenter +[Extra accessories]

PF55L Jacketed Conical Fermenter +[Extra accessories]

Regular price €899.00
Regular price €1,199.00 Sale price €899.00
Sale Sold out
Taxes included.
Black Friday price. Lowest price in the 30 days before the sale: €1,199.00

🚛 Oversized item · 28 kg · Shipping to Germany: €14.90

Delivery 2–4 business days · order by 13:00 CET for same-day dispatch · Shipping details · Free shipping over €149 does not apply to fermenters, kettles and other large items

Crew Earns 899 Crew points · How it works

Pairs well with

  • 1.5" Spunding Valve with pressure Gauge and GAS port 1.5" Spunding Valve with pressure Gauge and GAS port 5+ in stockView details €174.95
  • 2" DryHop kit! 2" DryHop kit! Only 2 leftView details €159.95
  • Cooling kit! - Jacketed fermenters to Lindr and Icemaster chiller Cooling kit! - Jacketed fermenters to Lindr and Icemaster chiller 5+ in stockView details €79.45
  • Filter Kit! Filter Kit! Only 3 leftView details €249.95

Read customer reviews · ✓ 2-year EU warranty

Glycol jacket outside. Nothing to clean around inside.

The BrewTaurus PF55L Jacketed Conical Fermenter is a 304 stainless conical with a double-wall cooling jacket (3.0 L) — 55–58 L filled to the top, for 42–45 L batches. Run the jacket off a glycol chiller and the tank cools evenly with no coil inside. Pressure-rated to 1 bar (15 PSI), so you can ferment under pressure, spund and carbonate in the same tank. Domed lid with 4", 2" and 1.5" TC ports, 18.5 L cone with a 2" dump, sampling valve, thermowell and pressure/vacuum valve in the box.

Capacity 55–58 L filled to the top · cone 18.5 L
Fermentation batch 42–45 L · minimum 25 L · fill no more than ~90 %
Cooling double-wall glycol jacket, 3.0 L · insulation jacket in the box
Pressure working pressure 1 bar (15 PSI) · always use a PRV rated for 1 bar
Heating 2" TC port on the side of the cone for a heating element · element not included
Lid domed, band-clamp sealed · 4" + 2" + 1.5" TC ports
Material 304 stainless, glossy finish · body 1.2 mm · jacket 0.8 mm · lid 1.2 mm
Height 90.8 cm · 99.7 cm with castors and blow-off barb
Stand 3 legs with locking castors · stainless plate between legs and castors
Guarantee 2-year legal guarantee (EU consumer law)

Ports & connections

Port Where Job
Top port
4" TC
centre of the lid dry hopping, filling, cleaning · cap in the box
Lid port
2" TC
lid additions, dry hopping · cap in the box
Lid ports
1.5" TC
lid pressure/vacuum valve and blow-off barb (both in the box), gas in, spunding
Cone ports
3× 1.5" TC
front of the cone, side by side accessories: thermowell and sampling valve (both in the box), carb stone or sensors · cap in the box
Front port
2" TC
front of the cone transfer off the yeast · butterfly valve in the box
Heating-element port
2" TC
side of the cone 2" Tri-Clamp heating element (not included) · cap in the box
Bottom dump
2" TC
apex of the cone yeast harvest, trub dump, draining · elbow + butterfly valve in the box

Heating element fit (2" cone port)

Measured by hand on a production tank — PF55L, PF75L and PF105L share the same cone geometry. Allow a few millimetres when choosing an element.

Max insertion depth (TC gasket face → opposite inner wall) ≈ 335 mm
Cone inner diameter at the port height ≈ 285 mm
Elements that fit insertion length up to ≈ 300 mm

Dimensions

Height 90.8 cm · 99.7 cm with castors and blow-off barb
Cooling jacket volume 3.0 L
Wall thickness body 1.2 mm · jacket 0.8 mm · lid 1.2 mm

What's in the box

  • PF55L Jacketed Conical Fermenter with domed lid and lid band clamp
  • Adjustable pressure/vacuum valve 1.5" · sampling valve · insulation jacket · 2 m food-grade silicone hose
  • 1× 4" TC clamp + gasket + cap · 5× 2" TC clamp + gasket + 2× cap · 5× 1.5" TC clamp + gasket + 3× cap
  • 2× 2" butterfly valve + 1× 2" elbow · 1.5" thermowell · 1.5" blow-off barb · 3× castors + stainless leg plate
  • Instruction manual (EN/CZ)

Not included: glycol chiller and hoses, temperature controller, heating element, CO₂ cylinder and regulator. Clean and sanitise before first use.

Pressure safety: working pressure 1 bar (15 PSI) — never exceed it. Always fit a PRV rated for 1 bar and never put a valve between the tank and the PRV. Tighten the lid band clamp fully before adding pressure (about 2.8–3.2 cm between the clamp ends) and never tighten or loosen clamps while the tank is under pressure.

Run the jacket off a glycol chiller · Heat it with a 2" heating element · Clean it with the CIP Kit · See all Pressurised Fermenters

Which jacketed size fits your batch

One design in four sizes, all glycol-jacketed and rated to 1 bar — your size is highlighted.

Model Filled to the top Batch Cooling jacket Height (castors + blow-off)
PF30 Jacketed 30–32 L ~25 L 1.96 L 83.2 cm
PF55 Jacketed 55–58 L 42–45 L 3.0 L 99.7 cm
PF75 Jacketed 70–75 L 62–65 L 4.38 L 112.6 cm
PF105 Jacketed 100–105 L 87–90 L 6.8 L 133.9 cm

FAQ

Why a jacket instead of a coil?
The glycol flows between the two walls, so the beer cools through the whole wall and there is nothing inside the tank to clean around.

What pressure can I ferment at?
Up to 1 bar (15 PSI) working pressure — enough to spund, ferment under pressure and carbonate. Always with a PRV rated for 1 bar.

What do I need to run the jacket?
A glycol chiller with hoses, plus a temperature controller. The insulation jacket in the box holds the temperature between cooling cycles.

How small a batch can I ferment?
The minimum batch is 25 L.

Can I heat it?
Yes. The 2" TC port on the side of the cone takes a 2" Tri-Clamp heating element (not included) with an insertion length up to about 300 mm — for Kveik or a cold room. Keep the element fully covered whenever it is on. Power control is external (temperature controller + relay). 230 V · one dedicated, RCD-protected circuit per element — have a qualified electrician size and connect the circuits.

Product photos may show a different size or an earlier production run.

SKU:000245

View full details

Recommended accessories