Ferment under pressure like a pro.
The BrewTaurus PF30L Conical Fermenter brings pressurised fermentation to your setup in durable 304 stainless steel. Ferment under pressure up to 1 bar (15 PSI) for faster, cleaner ferments and built-in carbonation control. The steep 60° cone drives trub and yeast down for crystal-clear beer, and the all-tri-clamp design lets you connect, monitor and mod with ease.
Why ferment under pressure
Fermenting under pressure (to 1 bar / 15 PSI) suppresses fusel and off-flavours, lets you ferment warmer and faster, and carbonates the beer as it ferments — so you can go from grain to served with less oxygen pickup and fewer transfers.
Ports & layout
The domed lid carries a 4" TC top port (dry hop, drop-in chilling coil or other accessories), a 2" TC port, and two 1.5" TC ports (PRV, airlock, blow-off barb or hop-drop kit). The cone adds three more 1.5" TC ports for a thermowell, carb stone, pressure gauge or sample valve. A 2" dump valve at the base makes harvesting yeast and cleaning quick. It stands on three fixed legs with mountable wheels.
What's in the box
- PF30L Conical Fermenter (working pressure 1 bar / 15 PSI, max 2 bar / 30 PSI)
- Domed lid with 4" + 2" + 2× 1.5" TC ports; band-clamp lid seal with gasket
- 1× 4" band clamp + gasket + cap · 3× 2" band clamp + gasket + 1× 2" cap
- 5× 1.5" band clamp + gasket + 2× 1.5" cap
- 2" butterfly valve + 2" TC elbow · 1.5" butterfly valve
- 1.5" TC thermowell · 1.5" TC blow-off barb · 3× wheels
- Instruction manual
Pressure safety: working pressure 1 bar (15 PSI), never exceed the 2 bar (30 PSI) maximum. Always use a PRV.
Expand it with 1.5" and 2" tri-clamp fittings · Clean it with the CIP Kit · See all Pressurised Fermenters
Which PF30L version fits you
Three ways to run a 30 L BrewTaurus pressure fermenter — same class, different cooling and workflow. Your version is highlighted.
| Version |
Cooling |
Best for |
| PF30L Conical (non-jacketed) |
Optional drop-in chilling coil |
Lowest-cost entry into pressure fermentation |
| PF30L Jacketed Conical |
Integral glycol jacket |
Hands-off, even temperature control |
| PF30L Unitank |
Jacketed + 8" lid + 2" dump |
Yeast harvesting & full unitank workflow |
Specifications
| Model |
BrewTaurus PF30L Conical Fermenter |
| Material |
SS304, brush finish (glossy lid) |
| Capacity |
30–32 L (full) · 25–27 L batch |
| Pressure |
Working 1 bar (15 PSI) · Max 2 bar (30 PSI) |
| Cone |
60° |
| Wall thickness |
Body 1.0 mm · Lid 1.2 mm |
| Height |
75.7 cm (83.2 cm with blow-off barb + wheels) |
| Width (with handles) |
46.1 cm |
| Net weight |
15 kg (excl. accessories) |
