BrewTaurus.com | Brewing Technology
PF160 Insulated Unitank — Tank Only
PF160 Insulated Unitank — Tank Only
Current stock is sold out. This pre-order is for the next batch. · 3 left from this batch
We'll email you the moment it ships.
🚛 Ships on a pallet · 49 kg · Shipping to Germany: €49
Delivery 3–5 business days · Shipping details · Free shipping over €149 does not apply to fermenters, kettles and other large items
Crew Earns 2000 Crew points · How it works
Pairs well with
Read customer reviews · ✓ 2-year EU warranty
Couldn't load pickup availability
The PF160 Insulated Unitank, tank only. For brewers who already own their fittings.
The same tank as our PF160 Insulated Unitank complete set: 304 stainless vessel, two separate glycol jackets on the cone and the body, ~2 cm PU foam under a stainless skin instead of a neoprene sleeve. It comes on its 4 legs with adjustable feet. The valves, caps, clamps and pressure gear from the set are not included.
The 8" top port is open. To close and pressurise the tank you need an 8" Tri-Clamp closure, such as our 8" multi-port reducer cap or your own, with an 8" band clamp, an 8" gasket and a PRV. Never pressurise the tank without a PRV.
At a glance
| Volume | 173.3 L brim-full · 163.4 L to the top of the straight wall · cone 39.8 L · cylinder 123.6 L |
| Fermentation batch | ~10–150 L |
| Cooling | Two independent glycol jackets, cone and body · 2× 1.5" TC per jacket |
| Insulation | ~2 cm PU foam under a stainless skin on the cone and the body · top head bare |
| Ports | 8" TC top port · 4× 1.5" TC on the top head · 3× 1.5" TC on the cone · 1.5" TC racking port · 2" TC heating-element port · 2" TC bottom dump |
| Dimensions | Ø550 mm inner · Ø600 mm outer (insulated skin) |
| Height | 1339 mm from the leg ends to the top of the 8" ferrule, adjustable feet extra |
| Material | 304 stainless vessel · 1.5 mm sheet |
In the box
- PF160 Insulated Unitank with two glycol jackets
- 4 legs with adjustable feet
Not included
Everything in the complete set's accessory pack: 1.5" and 2" butterfly valves, 1.5" sample valve, 2" elbow, 1.5" thermowell, 1.5" pressure gauge, 1.5" PRV, caps (3× 1.5", 2", 4"), 8"→4" reducer, band clamps and gaskets (8× 1.5", 3× 2", 4", 8"). Also not included: heating element, glycol chiller and hoses, temperature controller, CO₂ cylinder and regulator. Passivate before first use, as with all stainless brewing gear.
Want it ready to brew? The PF160 Insulated Unitank complete set comes with every fitting listed above. Full specifications, volumes, drawing and FAQ are on that page · Run both zones off a glycol chiller · See all Pressurised Fermenters
Photos may show the tank with the complete-set fittings fitted; the tank-only version ships without them.
SKU:000412
View full details
