*PRE-ORDER* PF160 PRO Unitank +[Extra accessories]

Fermentation on a whole new level — insulated, dual-zone, 160 L.

The PF160 PRO Unitank is a serious 160 L fermenter for brewers who demand absolute control. Independent cooling zones for the cone and body, 2 cm PU foam insulation instead of neoprene sleeves, and efficient chilling from as little as 5 L of wort — equally at home with small test batches and full-volume brews. Rated to 2 bar.

Pre-order item. Contact us for the current batch lead time before ordering.

Why PF80 PRO

Why PF160 PRO

• Dual-zone chilling — independent glycol circuits for the cone and the body
• 2 cm PU foam insulation — no neoprene sleeves, no condensation, no temperature swings
• Rated to 2 bar — ready for serious pressure fermentation
• Chills efficiently from just 5 L of wort

Cone

• 2" dump port with elbow + butterfly valve — no clogged-trub nightmares
• 1.5" racking port with butterfly valve — pull the cleanest beer possible
• 3× 1.5" accessory ports — fitted with sampling valve + thermowell
• 2" heating element port — for extra fermentation control
• 2× 1.5" glycol inlet ports — dedicated cone cooling circuit

Body & top

• Body fully wrapped in 2 cm PU foam insulation; 2× 1.5" glycol inlet ports (separate body circuit)
• 8" top port with 8"→4" sanitary reducer, band clamp and custom tightening wrench
• 4× 1.5" accessory ports on top — fitted with PRV, pressure gauge and gas post

Extra accessories included

• 1× 1.5" butterfly valve · 1× 2" butterfly valve · 1× 1.5" tri-clover sample valve · 1× 2" elbow
• 1× 1.5" thermowell (79 mm) · 1× 1.5" pressure gauge · 1× 1.5" PRV
• Caps: 3× 1.5" · 1× 2" · 1× 4" · 8"→4" reducer
• Band clamps: 8× 1.5" · 3× 2" · 1× 4" · 1× 8" (with tightening key) · matching gaskets

Pressure safety: rated to 2 bar — never exceed the maximum. Always use a PRV.

Run both zones off a glycol chiller · Clean it with the CIP Kit · See all Pressurised Fermenters

Which PRO Unitank size fits your batch

BrewTaurus PRO Unitanks share one insulated, dual-zone design — 2 cm PU foam, independent cone + body glycol circuits, rated to 2 bar, with an 8" top and 2" dump. Dimensions are approximate (~), scaled from the manufacturer drawings. Your size is highlighted.

Model	Gross volume	Fermentation batch	Body Ø	Overall height
PF80 PRO	80 L	~5–75 L	~Ø450 mm	~1000 mm
PF160 PRO	160 L	~10–150 L	~Ø550 mm	~1340 mm
PF320 PRO	320 L	~20–300 L	~Ø690 mm	~1690 mm

Specifications

Model	PF160 PRO Unitank (insulated, dual-zone)
Material	Insulated stainless steel
Capacity	160 L
Pressure rating	2 bar
Cooling	Dual-zone glycol (independent cone + body circuits)
Insulation	2 cm PU foam
Min chilling volume	~5 L
Top port	8" (with 8"→4" reducer)
Dump port	2"
Body diameter	~Ø550 mm (footprint ~Ø600 mm) · approx., from drawing
Overall height	~1340 mm · approx., from drawing