Brew day

How to Brew Beer at Home: All-in-One Brew Day, Step by Step

A full brew day on an all-in-one system, from strike water to fermenter, with the mash-in that keeps your element clean.

How to Brew Beer at Home: All-in-One Brew Day, Step by Step

On an all-in-one system you mash, boil and chill in one stainless vessel, then move the wort to your fermenter. Here is the full brew day on a BrewTaurus B40L or B70L, including the mash-in routine that keeps the heating element clean.

The short version

  • Mash: 65–68 °C for about 60 minutes
  • Mash-in: element off, pump on, stir only to break up clumps
  • Boil: 60–90 minutes at full power
  • Ferment: chill to 18–20 °C for ales, pitch, 7–14 days

Before you start

  • Crushed malt, hops and yeast. No recipe yet? Our all-grain kits come portioned for a 25 L batch.
  • Clean water. If your tap water smells of chlorine, filter it. Want to fine-tune it? Water salts and acid are here.
  • A clean, sanitised fermenter waiting for the wort.

And clean as you go. Future you, at midnight, will be grateful.

1. Heat the strike water

Fill the kettle to the mark your recipe needs and set the mash temperature on the controller or in the Tuya Smart app. The B40L and B70L have a delayed start: set it the night before and wake up to hot water.

2. Mash in without scorching

  1. Element off, pump on. Keep the wort moving while the malt goes in.
  2. Add the malt slowly. Stir only enough to break up dry clumps, then put the paddle down.
  3. Let the grain bed settle for 5–10 minutes with the pump still running, then switch the heat back on.
  4. Hold 65–68 °C for about 60 minutes. Around 1000 W is plenty during the mash: gentler heat, steadier temperature. For step mashes, the controller takes up to nine steps.

Stirring pushes fine flour through the screen and onto the element, and that is where scorching starts. The full story is in mash scorching in all-in-one systems.

3. Lift, drain and sparge

Lift the grain basket and let it drain into the kettle. Need more volume? Sparge with hot water over the grain, about 1–2 L per minute, until you reach your pre-boil volume.

4. Boil

Now full power: 2.5 kW on the B40L, 3.2 kW on the B70L. Expect the temperature to climb about 1–2 °C per minute. Boil for 60–90 minutes, depending on the recipe.

Hops for When
Bitterness At the start of the boil, usually 60 minutes
Flavour 15–30 minutes before the end
Aroma At flameout, or in a whirlpool at 80–90 °C

5. Whirlpool and chill

With 15 minutes of boil left, put the chilling coil and the whirlpool arm in the kettle. The boil sanitises them for you. Both come with the B40L and B70L.

After flameout, chill fast: 18–20 °C for most ales, colder for lagers. A quick chill means less risk of infection and clearer beer.

6. Into the fermenter

Transfer the wort into your sanitised fermenter and pitch the yeast. Fermentation takes 7–14 days depending on the yeast and the style. Keep the temperature steady: here is why and how. Fermenting under pressure? Read how pressure fermentation works first.

7. Bottle, keg or pour from the tank

Once the gravity is stable, package the beer:

  • Bottles with priming sugar.
  • A keg and CO₂, set with the force carbonation chart.
  • Straight from a pressure fermenter. Nothing beats the taste and the creamy head of beer poured from the tank.

Quick answers

What mash temperature should I use?

65–68 °C. Lower gives a drier beer, higher gives more body.

Why does my all-in-one scorch?

Almost always fine flour on the element, pushed through the screen by stirring. Element off and pump on during mash-in fixes most of it: mash scorching.

Do I have to sparge?

No. It helps you hit your pre-boil volume and rinses more sugar out of the grain.

What batch size fits the B40L and B70L?

15–30 L on the B40L, 20–55 L on the B70L.

Need a fermenter for it? Start here: How to choose a fermenter

Questions about your setup? Write to info@brewtaurus.com.

Mash gently, boil hard, chill fast.
Dan, founder of BrewTaurus

Newsletter · every Wednesday

One email a week

New guides, new gear, restocks and brew tips. Worth opening before brew day.

Unsubscribe in one click. Privacy policy