K40 Boil Kettle + Malt Pipe – Complete Set (incl. valves & clamps)

The system you buy when AIO stops making sense.

K40 Boil Kettle with Malt Pipe — full tri-clamp architecture, real mash workflow.

This is a modular stainless brewhouse foundation — with a proper malt pipe from day one.

Built from stainless steel.
Designed around tri-clamp architecture.
Made to grow — not to be replaced.

What this kettle actually is

The K40 + Malt Pipe is a modular stainless boil kettle setup that can run like a real mash system — without locking you into proprietary AIO hardware.

You start with stainless.
You decide how far it goes.

One vessel.
Two-vessel.
Three-vessel brewhouse.

Nothing here is temporary.

This is for you if

• You’ve outgrown all-in-one systems
• You want a real malt pipe workflow instead of bag hacks
• You plan to upgrade, not replace
• You care how things are built — not just how they look

If you’re looking for shortcuts, this isn’t it.

Stainless-first brewing

No plastic paths.
No hidden electronics.
No dead ends.

Just stainless steel, sanitary connections, and a system that scales with you.

Why K-Series

Architecture scales. Your workflow doesn’t change.

• Full tri-clamp architecture across all K-Series sizes
• Dish bottom with central bottom drain for complete drainage
• Port layout designed for real brewing workflows
• Identical logic whether you brew 40 L or 200 L

Every port has a job. No decoration.

Malt Pipe workflow

With the Malt Pipe installed, the K40 becomes a proper mash-capable vessel: load grain, recirculate, lift, drain, sparge — clean and repeatable.

• Grain capacity: approx. 12–16 kg, depending on malt type and crush
• Malt pipe volume: approx. 30 L (grain basket volume)
• Below malt pipe bottom: approx. 9.8 L (space under the basket)
• Tri-clamp consistency: ports are designed around sanitary TC workflow (one port is 2" TC, the rest are 1.5" TC)

The point is simple: you get a real mash workflow now — and you keep full modular upgrade freedom later.

Port architecture (overview)

The K40 is designed around a clean, functional port layout. Every port has a job — no decoration.

• Bottom drain: 1.5" Tri-Clamp, centered for complete drainage
• Heating port: 1 × 2" Tri-Clamp (electric heating element ready)
• Process ports: 2 × 1.5" Tri-Clamp (return / whirlpool / transfer)
• Thermowell port: 1 × 1.5" Tri-Clamp

The same logic is used across the entire K-Series, so your workflow stays consistent as your system grows.

What’s included in the Complete Set configuration

Complete sanitary hardware set — valves, clamps, gaskets and internal fittings included.

• K40 stainless steel boil kettle (SS304)
• Stainless steel lid with central 1.5" Tri-Clamp port
• Dish bottom with central bottom drain
• Stainless Malt Pipe (grain basket)
• False bottom (K40)
• 1 × 1.5" Tri-Clamp elbow
• 4 × 1.5" Tri-Clamp butterfly valves
• 12 × 1.5" Tri-Clamp band clamps
• 12 × 1.5" Tri-Clamp gaskets
• 1 × 1.5" Tri-Clamp blind cap
• 1 × 1.5" Thermowell
• 2 × 1.5" Racking / pick-up / whirlpool arms
• 1 × 2" Tri-Clamp band clamp
• 1 × 2" Tri-Clamp gasket
• 1 × 2" Tri-Clamp blind cap
• Brushed stainless finish

Everything you need for a proper stainless mash + boil workflow.
No fillers. No placeholders.

What we intentionally don’t include

• Heating elements
• Controllers
• Pumps
• Hoses or quick-connects

This configuration gives you a clean, stainless foundation.
Add heating, pumping and control your way — or step straight into a complete setup in our Brewing Systems.

Built to grow — not to be replaced

Start with a single vessel mash + boil.
Add heating, pumping or HERMS when you’re ready.
Expand into a one-vessel, two-vessel or three-vessel brewhouse.

No replacements. No compromises. No wasted stainless.

Technical specifications

• System type: Boil kettle + Malt Pipe
• Material: Stainless steel SS304
• Wall thickness: 1.2 mm
• Lid thickness: 1.0 mm
• Bottom: Dish bottom with central drain
• Heating port: 1 × 2" Tri-Clamp
• Finish: Brushed stainless
• Malt pipe volume: approx. 30 L

FAQ

Can I run this as a single-vessel mash + boil system?

Yes.
That’s exactly what the Malt Pipe is for — a clean, repeatable mash workflow inside a real stainless vessel.

Why doesn’t it include a controller or pump?

Because those are decisions you shouldn’t be locked into.
You’re buying stainless architecture first — then you build the control stack that fits your process.

Can I add heating elements later?

Yes.
The kettle is designed for standard tri-clamp heating elements and modular upgrades.