K220 Boil Kettle + Malt Pipe – Complete Set (incl. valves & clamps)

The system you buy when AIO stops making sense.

K220 Boil Kettle with Malt Pipe — full tri-clamp architecture for serious batch sizes.

This is a modular stainless brewhouse foundation — built for real volume and real mash loads.

Built from stainless steel.
Designed around tri-clamp architecture.
Made to scale — not to be replaced.

---

What this kettle actually is

The K220 + Malt Pipe is a large-format modular boil kettle designed for brewers who need real mash capacity — without stepping into fixed, proprietary brewhouse systems.

You start with stainless.
You decide how far it goes.

Single vessel.
Multi-vessel.
Full brewhouse.

Nothing here is temporary.

---

This is for you if

• You brew large batches and need serious mash volume
• You’ve outgrown hobby-scale systems
• You want stainless architecture, not appliances
• You plan to scale — not start over
• You care how things are built, not how they’re marketed

If you’re looking for shortcuts, this isn’t it.

---

Stainless-first brewing

No plastic paths.
No hidden electronics.
No dead ends.

Just stainless steel, sanitary connections, and a system that scales with you.

---

Why K-Series

Architecture scales. Your workflow doesn’t change.

• Full tri-clamp architecture across all K-Series sizes
• Dish bottom with central bottom drain for complete drainage
• Port layout designed for real brewing workflows
• Identical logic whether you brew 40 L or 225 L

Every port has a job. No decoration.

---

Malt Pipe workflow

With the Malt Pipe installed, the K220 becomes a true high-capacity mash vessel: load grain, recirculate, lift, drain and sparge — clean, stable and repeatable.

• Grain capacity: approx. 50–72 kg, depending on malt type and crush
• Total kettle volume: 225 L
• Working level: approx. 200 L
• Volume below false bottom / malt pipe area: approx. 26.5 L
• Tri-clamp consistency: 2 × 2" TC ports, all other ports 1.5" TC

This is mash capacity intended for serious production-scale batches — without locking you into a fixed brewhouse layout.

---

Port architecture (overview)

The K220 is designed around a clean, functional port layout. Every port has a job — no decoration.

• Bottom drain: 1.5" Tri-Clamp, centered for complete drainage
• Heating ports: 2 × 2" Tri-Clamp (electric heating element ready)
• Process ports: 2 × 1.5" Tri-Clamp (return / whirlpool / transfer)
• Thermowell port: 1 × 1.5" Tri-Clamp

The same logic is used across the entire K-Series, so your workflow stays consistent as your system grows.

---

What’s included in the Complete Set configuration

Complete sanitary hardware set — valves, clamps, gaskets and internal fittings included.

• K220 stainless steel boil kettle (SS304)
• Stainless steel lid with central 1.5" Tri-Clamp port
• Dish bottom with central bottom drain
• Stainless Malt Pipe (grain basket)
• False bottom (K220)
• 1 × 1.5" Tri-Clamp elbow
• 3 × 1.5" Tri-Clamp butterfly valves
• 12 × 1.5" Tri-Clamp band clamps
• 12 × 1.5" Tri-Clamp gaskets
• 1 × 1.5" Tri-Clamp blind cap
• 1 × 1.5" Thermowell
• 2 × 1.5" Racking / pick-up / whirlpool arms
• 2 × 2" Tri-Clamp band clamps
• 2 × 2" Tri-Clamp gaskets
• 2 × 2" Tri-Clamp blind caps
• Brushed stainless finish

Everything you need for a proper stainless mash + boil workflow.
No fillers. No placeholders.

---

What we intentionally don’t include

• Heating elements
• Controllers
• Pumps
• Hoses or quick-connects

This configuration gives you a clean, stainless foundation.
Add heating, pumping and control your way — or step straight into a complete setup in our Brewing Systems.

---

Built to grow — not to be replaced

Start with mash + boil in a single vessel.
Expand into multi-vessel or brewhouse layouts.
Scale without replacing stainless.

No replacements. No compromises. No wasted stainless.

---

Technical specifications

• System type: Boil kettle + Malt Pipe
• Total kettle volume: 225 L
• Working level: approx. 200 L
• Volume below false bottom / malt pipe: approx. 26.5 L
• Material: Stainless steel SS304
• Wall thickness: 1.2 mm
• Lid thickness: 1.0 mm
• Bottom: Dish bottom with central drain
• Heating ports: 2 × 2" Tri-Clamp
• Finish: Brushed stainless

---

FAQ

Is this suitable for production-scale brewing?

Yes.
This system is designed for serious batch sizes while retaining full modularity.

Why doesn’t it include controllers or pumps?

Because those decisions depend on your process.
You’re buying stainless architecture first — control comes second.

Can I integrate this into a larger brewhouse later?

Yes.
The K220 follows the same logic as the rest of the K-Series — it’s built to integrate, not isolate.

---