PF320 PRO Unitank

Insulated. Dual-zone chilling. The biggest PRO Unitank — 320 L.

The PF320 PRO Unitank brings the insulated, dual-zone PRO architecture to full pilot scale. Independent cooling zones for the cone and body, 2 cm PU foam insulation instead of neoprene sleeves, and efficient chilling from small volumes right up to a full 320 L brew. Rated to 2 bar for serious pressure fermentation.

Pre-order / made to order. Contact us for the current batch lead time before ordering.

Why PF320 PRO

• Dual-zone chilling — independent glycol circuits for the cone and the body
• 2 cm PU foam insulation — no neoprene sleeves, no condensation, no temperature swings
• Rated to 2 bar — ready for serious pressure fermentation
• Pilot-scale 320 L with the same precise control as the smaller PRO tanks

Cone

• 2" dump port with elbow + butterfly valve — no clogged-trub nightmares
• 1.5" racking port with butterfly valve — pull clear beer off the cone
• 3× 1.5" accessory ports — sampling valve + thermowell
• 2" heating element port — for controlled temperature boosts
• 2× 1.5" glycol inlet ports — dedicated cone cooling circuit

Body & top

• Body fully wrapped in 2 cm PU foam insulation; 2× 1.5" glycol inlet ports (separate body circuit)
• 8" top port with 8"→4" sanitary reducer, band clamp and custom tightening wrench
• 4× 1.5" accessory ports on top — PRV, pressure gauge and gas post

Pressure safety: rated to 2 bar — never exceed the maximum. Always use a PRV.

Run both zones off a glycol chiller · Clean it with the CIP Kit · See all Pressurised Fermenters

Which PRO Unitank size fits your batch

BrewTaurus PRO Unitanks share one insulated, dual-zone design — 2 cm PU foam, independent cone + body glycol circuits, rated to 2 bar, with an 8" top and 2" dump. Dimensions are approximate (~); PF320 figures are estimated by scaling pending its drawing. Your size is highlighted.

Specifications