K200 1V Brewing System – 207L One-Vessel Stainless Brewhouse

207L One-Vessel Brewing System.

Mash and boil in a single 207L-class stainless vessel. 7kW heating. MP40 pump. Full tri-clamp architecture.

Designed operating range

• Nominal vessel capacity: 207 L
• Total vessel volume: 207 L
• Recommended production range (into fermenter): 100–160 L
• Maximum practical knockout volume: 170–180 L
• Flexible batch capability: ~50–180 L

Optimized for stable operation in the 120–160L range.
Smaller batches are fully supported by adjusting heating power and flow control.

System architecture

• Single vessel design: mash and boil in one kettle
• Laser-cut false bottom: K200 size
• Heating configuration: 2 × 3.5 kW 2" Tri-Clamp elements
• Total installed power: 7 kW
• Routing: full 1.5" sanitary tri-clamp ports

The K200 1V keeps the workflow simple while maintaining full stainless process architecture.

Heating performance

• 2 × 3.5 kW 2" Tri-Clamp heating elements
• 2 × Inkbird C236T (16A EU plug)

Electrical requirement: two independent 16A circuits.

Estimated heat-up (120 L water, 15°C → 100°C):
≈ 35–50 minutes depending on ambient conditions.

Boil performance (140–160 L):
Stable rolling boil. Expected evaporation ~6–8% per hour (environment dependent).

Grain load & mash performance

• Recommended grain bill: 35–55 kg
• High gravity capability: up to ~60 kg
• Recommended mash thickness: 2.6–3.2 L/kg

Example: 45 kg grain × 2.8 L/kg → ~126 L mash volume.
Stable recirculation supported by the MP40 pump within this operating range.

For optimal flow stability, mash thickness below 2.3 L/kg is not recommended.

Hydraulics & flow

• 1 × MP40 65W pump (continuous duty capable)
• Full 1.5" tri-clamp architecture
• Stainless elbow and butterfly valves included
• False bottom for grain separation

The MP40 provides stable mash recirculation and whirlpool capability.
Designed for reliable transfer and process flow in 200L-scale batches.

Cooling

This configuration does not include a counterflow chiller by default.
Standard 1.5" tri-clamp routing allows integration of external chilling solutions or future upgrade to full system architecture.

Cleaning

All ports are sanitary tri-clamp.
System supports pump-assisted recirculation cleaning.
CIP-capable when fitted with a spray head.

Power & installation requirements

• 2 × independent 16A circuits
• Stable water supply (if external chiller used)
• Load-bearing surface (filled system approx. 250–320 kg depending on batch size)

Technical summary

• System type: One-vessel (Mash + Boil)
• Nominal vessel volume: 207 L
• Working batch range: 50–180 L
• Total heating power: 7 kW
• Pump: 1 × MP40 65W
• Architecture: Stainless tri-clamp
• Material: SS304