PF80 PRO Unitank – Insulated. Jacketed. Built to Dominate Fermentation.
PRE-ORDER – February 26 batch – Available
PRE-ORDER – October 25 batch – Sold out
Meet the PF80 PRO Unitank – an insulated, jacketed, pressure-rated fermenter for brewers who want maximum control, peak efficiency, and zero compromises.
🔥 80L insulated stainless steel tank with dual-zone chilling
⚡ Rated for 2 bar pressure – ready for serious fermentations
❄️ Independent cooling zones for the cone and body
🛡️ 2cm PU foam insulation – no more neoprene sleeves or condensation
🍺 Chills efficiently from just 5L of wort – test batches or full-volume brews, it handles both
| Extra accessories | QNT |
| 1.5" butterfly valve | 1 |
| 2" butterfly valve | 1 |
| 1.5" Tri Clover Compatible Sample Valve | 1 |
| 1.5‘’ TC thermowell 79mm | 1 |
| 2" Elbow | 1 |
| 1.5" Pressure gauge | 1 |
| 1.5" PRV | 1 |
| 1.5" TC CAP | 3 |
| 2" TC CAP | 1 |
| 4" TC CAP | 1 |
| 8" to 4" reducer | 1 |
| 1.5" Band Clamp | 8 |
| 2" Band Clamp | 3 |
| 4" Band Clamp | 1 |
| 8" Band Clamp | 1 |
| 1.5" TC gasket | 8 |
| 2" TC Gasket | 3 |
| 4" TC Gasket | 1 |
| 8" TC gasket | 1 |
| Tightening key for the 8" Band Clamp | 1 |
CONE – The Heart of Your Fermentation
- 2" dump port with elbow & butterfly valve – no more clogged trub nightmares.
- 1.5" racking port with butterfly valve – pull clear beer right off the cone.
- 3× 1.5" accessory ports – pre-installed with a sampling valve & thermowell.
- 2" heating element port – ready for controlled temp boosts when you need them.
- 2× 1.5" glycol inlet ports – dedicated cooling circuit for the cone.
BODY – Insulated Like a Fortress
- The body is fully wrapped in 2cm PU foam insulation.
- No neoprene sleeves. No condensation. No temperature swings.
- 2× 1.5" glycol inlet ports – separate cooling circuit for the body.
TOP – Easy Access, Full Control
- 8" top port with 8" to 4" sanitary reducer, band clamp & custom wrench for hassle-free sealing.
- 4× 1.5" accessory ports – fitted with a PRV, pressure gauge, and gas post.
PF80 PRO Unitank – Insulated, Pressurized, Ready to Brew.
Whether you're running small experimental batches or pushing a full 80L fermentation, the PF80 PRO Unitank delivers precise cooling, rock-solid insulation, and full control at every stage of the process.
Upgrade your fermentation. Brew smarter. Ferment better. 🍻