Two vessels, one skid, 600 litres per brew.
The BrewTaurus PRO BH2-600 is a 600 L two-vessel electric brewhouse: a mash/lauter tun with motor-driven rake and a kettle/whirlpool, with sanitary wort pump, plate heat exchanger and control cabinet between the vessels — piped, wired and tested as one system. Connect power, water and drain, and brew.
System architecture
- Mash/lauter tun (MLT) with motor-driven rake, false bottom, sparge spray ring, wort back-flow (vorlauf) inlet and 430 × 330 mm spent-grain side door
- Kettle/whirlpool (KW) with electric heating elements, tangential whirlpool inlet and Ø102 mm steam condensing pipe — no chimney through the roof
- Strike and sparge water are heated in the kettle and pumped to the mash tun through the hot water inlet
- Back-flushing line under the false bottom · CIP spray ball in both vessels
- Tri-clamp process routing · butterfly valves · plate heat exchanger on the skid
Process vessels
- MLT — rake drive on the lid · sparge spray ring · hot water inlet · wort back-flow inlet · spent-grain door · PT-100 temperature probe
- KW — electric heating elements · whirlpool inlet · wort outlet · drain · steam condensing pipe · level sensor port · PT-100 temperature probe
Hydraulics, control & cleaning
- Sanitary wort pump — transfers, vorlauf recirculation, sparge, whirlpool and knockout
- Plate heat exchanger with inline thermometer — wort to pitching temperature in one pass
- Control cabinet mounted between the vessels — temperature set points, heating, pump and rake control
- CIP-capable: spray ball in each vessel, tri-clamp loop, drain on both vessels
Two vessels or three?
A two-vessel brewhouse gives you the biggest batch for the floor space and the budget: 1000 L vessels, one brew of 600 L. The kettle doubles as the hot liquor tank, so sparge water is heated before the boil. If you plan back-to-back double brews every day, look at our three-vessel BH series with a dedicated hot liquor tank.
Installation: professional equipment, not plug-and-play. 400 V / 50 Hz three-phase supply sized to the heating elements, cold water for the heat exchanger and condensing pipe, floor drain and a load-bearing floor. Check your access route against the dimensions below. Positioning and hook-up on site by you or your electrician; commissioning guided live by our Prague team on a video call.
Technical summary
| System type | Two-vessel (MLT + KW), electric |
| Batch size | 600 L wort per brew |
| Vessel volumes | 600 L effective · 1000 L total per vessel |
| Heating / power | Electric · 2 × 18 kW heating elements (kettle) · installed power approx. 37.2 kW incl. pump and rake · 400 V / 50 Hz / 3-ph |
| Pump / HX | Sanitary wort pump · plate heat exchanger |
| Control | Control cabinet on the skid, PT-100 probes in both vessels |
| Material | SUS304 · TIG welded · pickled & passivated |
| Connections | Tri-clamp throughout |
| Lead time | Approx. 14–18 weeks incl. sea freight (made to order) |
Dimensions & vessel data
| Vessel diameter | Ø1200 mm · Ø1300 mm incl. 50 mm insulation |
| Footprint | approx. 3,343 × 2,138 mm — in-line layout, cabinet and pump between the vessels |
| Height | 1,877 mm overall (to top of rake drive) |
| Spent-grain door | 430 × 330 mm |
| Weight | approx. 1,300 kg |
Dimensions from the general arrangement drawing (standard configuration, mm). Port positions and options are confirmed on your drawing before production.
Warranty & support
- Warranty 3 years on vessels, 1 year on electrical and moving components
- Spare parts by air within days · commissioning by video call · on-site commissioning available by quote