The one pump that does it all.
If you buy one brewery pump, make it this one. The 65W MP-40RM magnetic drive pump moves hot wort, runs your HERMS/RIMS recirculation, pulls a whirlpool, feeds a chiller — and it's the only pump in our range with enough muscle to actually spin a CIP spray head. Stainless head, tool-free wing nuts, sealed mag-drive. Built for brewery systems from 50 to 400 litres.
Why magnetic drive
There's no shaft seal running into the liquid — the motor is magnetically coupled to the impeller and stays completely isolated from your wort. No mechanical seal to fail, no lubricant contamination, no leak path. That's why mag-drive pumps are the standard in brewing, food and pharma.
Built for heat
Rated for liquids up to boiling (100 °C) — safe for hot wort transfer, mash recirculation and CIP. The stainless head shrugs off heat and cleaners far better than plastic.
What it's for
- Wort transfer, mash recirculation (HERMS/RIMS), whirlpool
- CIP loops for kettles, fermenters and lines
- Hot- and cold-side transfers on 50–400 L systems
This is the pump in our CIP Kit · See all Pumps
Not self-priming. Mount below liquid level, flood the head before starting, and never run it dry. Use a valve to throttle flow — don't dead-head it for long periods.
Specifications
| Model | MP-40RM (centrifugal, single-stage) |
| Power | 65 W |
| Voltage | 220–240 V, 50–60 Hz, 1-phase |
| Max flow | 45 L/min (50 Hz) · 52 L/min (60 Hz) |
| Max head | 4.6 m (50 Hz) · 6.5 m (60 Hz) |
| Max temperature | 100 °C |
| Inlet / outlet | 3/4" BSPT (DN15) · ~16 mm hose |
| Head material | Stainless steel, wing-nut fasteners |